• Seulement Ubuntu 16.04 or nous sommes en 07/2019

• https://www.movidius.com/solutions/vision-processing-unit
• https://www.raspberrypi.org/downloads/raspbian/
• https://www.raspberrypi.org/documentation/installation/installing-images/README.md
• https://richardstechnotes.com/2019/01/03/yolov3-object-detection-now-working-on-ncs-2/
• https://docs.openvinotoolkit.org/latest/_docs_install_guides_installing_openvino_raspbian.html

Avec lien du mail réponse d'inscription

• https://software.intel.com/en-us/openvino-toolkit/documentation/get-started

NCS 2

• https://software.intel.com/en-us/neural-compute-stick
• https://software.intel.com/en-us/articles/intel-neural-compute-stick-2-and-open-source-openvino-toolkit

wget -c http://director.downloads.raspberrypi.org/raspbian_full/images/raspbian_full-2019-06-24/2019-06-20-raspbian-buster-full.zip
sha256sum 2019-06-20-raspbian-buster-full.zip
# Récup de la SD Card ou du disk externe
sudo fdisk -l
unzip -p 2019-06-20-raspbian-buster-full.zip | sudo dd of=/dev/mmc<x> bs=4M status=progress conv=fsync
sudo eject /dev/mmc<x>

Note: bs=1M faster write speeds this way, and conv=fsync is telling dd to flush data to the disk after every write.

• How to boot from a USB mass storage device on a Raspberry Pi

• Téléchargement de l'iso

wget -c http://director.downloads.raspberrypi.org/rpd_x86/images/rpd_x86-2019-04-12/2019-04-11-rpd-x86-stretch.iso

Vérifier le sha256sum

Puis création d'une clé USB bootable avec l'iso

sudo dd if=./2019-04-11-rpd-x86-stretch.iso of=/dev/sd<x> bs=4M status=progress && sync

Puis installation sur un disque USB sur un PC.

Ajout de “program_usb_boot_mode=1” à /boot/config.txt sur la SD Card

echo program_usb_boot_mode=1 | sudo tee -a /boot/config.txt
sudo reboot

Documentation à faire quand La Labomedia en aura acheter une!

• Boot flow for models prior to the Raspberry Pi 4