Labomedia Ressources

Outils pour utilisateurs

Outils du site

Piste : • Intelligence Artificielle • Raspberry Pi Installation • workshop_docker • Utilisations de Docker • Raspberry Pi openFrameworks
libretime_container_docker

Différences

Ci-dessous, les différences entre deux révisions de la page.

Lien vers cette vue comparative

Les deux révisions précédentesRévision précédente
Prochaine révision		Révision précédente
libretime_container_docker [2025/12/10 23:16] – Benjamin Labomedialibretime_container_docker [2026/03/26 20:51] (Version actuelle) – [Installer Libretime via Docker] Benjamin Labomedia
Ligne 6: Ligne 6:
 Tests partiellement réalisés sur Debian 13 et Ubuntu 24.04 Tests partiellement réalisés sur Debian 13 et Ubuntu 24.04
  
-Commencer pa installer Docker : Doc install Docker https://docs.docker.com/engine/install+Commencer par installer Docker : Doc install Docker https://docs.docker.com/engine/install
  
 Création d'une utilisatrice dédiée Création d'une utilisatrice dédiée
Ligne 13: Ligne 13:
   sudo su - libretimedocker   sudo su - libretimedocker
  
-Installer ensuite Libretime en tant qu'utilisatrice libretimedocker : Doc install Libretime https://libretime.org/docs/admin-manual/install/install-using-docker/+Installer ensuite Libretime en tant qu'utilisatrice libretimedocker : [[https://libretime.org/docs/admin-manual/install/install-using-docker/|Doc install Libretime docker]]
  
 +Il faut donc adapter les fichiers config.yml et docker-compose.yml puis ...
 +
 +Ne pas oublier d'initier la base de données depuis le répertoire d'install ! 
 +
 +  docker compose run --rm api libretime-api migrate
 +
 +Ensuite pour démarrer le container, toujours à partir du répertoire d'install :
 +  docker compose up -d
 +check si ça marche :
 +  docker compose ps
 +  docker compose logs -f
 +éteindre et virer les processus orphelins (les pauvres)
 +  docker-compose down --remove-orphans
 +
 +===== Ressources complémentaires - troubleshouting =====
 +  * La documentation Libretime https://libretime.org/docs/
 +  * Le forum Libretime https://discourse.libretime.org/
 +  * Problème de lecture des flux https comme webstream dans libretime https://github.com/libretime/libretime/issues/2938 et https://github.com/LibreTime/libretime/issues/1068
 +===== Libretime Docker docker-compose.yml =====
 +<file yml docker-compose.yml>
 +services:
 +  postgres:
 +    image: postgres:15
 +# pour assurer un démarrage au boot, ajouter cette ligne pour chaque service :
 +    restart: always
 +    volumes:
 +      - postgres_data:/var/lib/postgresql/data
 +    environment:
 +      POSTGRES_USER: ${POSTGRES_USER:-libretime}
 +      POSTGRES_PASSWORD: ${POSTGRES_PASSWORD:-libretime} # Change me !
 +    healthcheck:
 +      test: pg_isready -U libretime
 +
 +  rabbitmq:
 +    image: rabbitmq:3.13-alpine
 +    restart: always
 +    environment:
 +      RABBITMQ_DEFAULT_VHOST: ${RABBITMQ_DEFAULT_VHOST:-/libretime}
 +      RABBITMQ_DEFAULT_USER: ${RABBITMQ_DEFAULT_USER:-libretime}
 +      RABBITMQ_DEFAULT_PASS: ${RABBITMQ_DEFAULT_PASS:-libretime} # Change me !
 +    healthcheck:
 +      test: nc -z 127.0.0.1 5672
 +
 +  playout:
 +    image: ghcr.io/libretime/libretime-playout:${LIBRETIME_VERSION:-latest}
 +    restart: always
 +    init: true
 +    ulimits:
 +      nofile: 1024
 +    depends_on:
 +      - rabbitmq
 +    volumes:
 +      - ${LIBRETIME_CONFIG_FILEPATH:-./config.yml}:/etc/libretime/config.yml:ro
 +      - libretime_playout:/app
 +    environment:
 +      LIBRETIME_GENERAL_PUBLIC_URL: http://nginx:8080
 +
 +  liquidsoap:
 +    image: ghcr.io/libretime/libretime-playout:${LIBRETIME_VERSION:-latest}
 +    restart: always
 +    command: /usr/local/bin/libretime-liquidsoap
 +    init: true
 +    ulimits:
 +      nofile: 1024
 +    ports:
 +# à changer si plusieurs docker Libretime sur le même serveur
 +      - 8001:8001
 +      - 8002:8002
 +    depends_on:
 +      - rabbitmq
 +    volumes:
 +      - ${LIBRETIME_CONFIG_FILEPATH:-./config.yml}:/etc/libretime/config.yml:ro
 +      - libretime_playout:/app
 +    environment:
 +      LIBRETIME_GENERAL_PUBLIC_URL: http://nginx:8080
 +
 +  analyzer:
 +    image: ghcr.io/libretime/libretime-analyzer:${LIBRETIME_VERSION:-latest}
 +    restart: always
 +    init: true
 +    ulimits:
 +      nofile: 1024
 +    depends_on:
 +      - rabbitmq
 +    volumes:
 +      - ${LIBRETIME_CONFIG_FILEPATH:-./config.yml}:/etc/libretime/config.yml:ro
 +      - libretime_storage:/srv/libretime
 +    environment:
 +      LIBRETIME_GENERAL_PUBLIC_URL: http://nginx:8080
 +
 +  worker:
 +    image: ghcr.io/libretime/libretime-worker:${LIBRETIME_VERSION:-latest}
 +    restart: always
 +    init: true
 +    ulimits:
 +      nofile: 1024
 +    depends_on:
 +      - rabbitmq
 +    volumes:
 +      - ${LIBRETIME_CONFIG_FILEPATH:-./config.yml}:/etc/libretime/config.yml:ro
 +    environment:
 +      LIBRETIME_GENERAL_PUBLIC_URL: http://nginx:8080
 +
 +  api:
 +    image: ghcr.io/libretime/libretime-api:${LIBRETIME_VERSION:-latest}
 +    restart: always
 +    init: true
 +    ulimits:
 +      nofile: 1024
 +    depends_on:
 +      - postgres
 +      - rabbitmq
 +    volumes:
 +      - ${LIBRETIME_CONFIG_FILEPATH:-./config.yml}:/etc/libretime/config.yml:ro
 +      - libretime_storage:/srv/libretime
 +
 +  legacy:
 +    image: ghcr.io/libretime/libretime-legacy:${LIBRETIME_VERSION:-latest}
 +    restart: always
 +    init: true
 +    ulimits:
 +      nofile: 1024
 +    depends_on:
 +      - postgres
 +      - rabbitmq
 +    volumes:
 +      - ${LIBRETIME_CONFIG_FILEPATH:-./config.yml}:/etc/libretime/config.yml:ro
 +      - libretime_storage:/srv/libretime
 +
 +  nginx:
 +    image: ghcr.io/libretime/libretime-nginx:${LIBRETIME_VERSION:-latest}
 +    restart: always
 +    ports:
 +      - 127.0.0.1:8080:8080
 +#pour faire en sorte que le nginx intégré au docker n'écoute qu'en local (possible aussi de changer le 8080:8080 par 8081:8080 pour faire cohabiter plusieurs instances sur le même serveur via différent proxy vhost
 +    depends_on:
 +      - legacy
 +    volumes:
 +      - libretime_storage:/srv/libretime:ro
 +
 +#pour désactiver le icecast intégré au docker et utiliser un icecast externe, commenter les lignes ci-dessous
 +#  icecast:
 +#    image: ghcr.io/libretime/icecast:2.4.4
 +#    ports:
 +#      - 8000:8000
 +#    environment:
 +#      ICECAST_SOURCE_PASSWORD: ${ICECAST_SOURCE_PASSWORD:-hackme} # Change me !
 +#      ICECAST_ADMIN_PASSWORD: ${ICECAST_ADMIN_PASSWORD:-hackme} # Change me !
 +#      ICECAST_RELAY_PASSWORD: ${ICECAST_RELAY_PASSWORD:-hackme} # Change me !
 +
 +volumes:
 +  postgres_data: {}
 +  libretime_storage: {}
 +  libretime_playout: {}
 +
 +</file>
 +===== Libretime Docker config.yml =====
 +<file yml config.yml>
 + 
 +# See https://libretime.org/docs/admin-manual/setup/configuration/
 +
 +general:
 +  # The public url.
 +  # > this field is REQUIRED
 +  public_url: https://****.*******.org
 +  # The internal API authentication key.
 +  # > this field is REQUIRED
 +  api_key: radio.radiocampus.org.APIKEY.clefaleatoireanventer
 +  # The Django API secret key.
 +  # > this field is REQUIRED
 +  secret_key: radio.radiocampus.org.SECRETKEY.clefaleatoireanventer
 +
 +  # List of origins allowed to access resources on the server, the public url
 +  # origin is automatically included.
 +  # > default is []
 +  #allowed_cors_origins: []
 +  allowed_cors_origins: [https://radio.radiocampus.org/, http://radio.radiocampus.org/, http://live.radio-campus.org:8000/, https://live.radio-campus.org:8002/, https://localhost, http://localhost]
 +
 +  # The server timezone, should be a lookup key in the IANA time zone database,
 +  # for example Europe/Berlin.
 +  # > default is UTC
 +  timezone: Europe/Paris
 +
 +  # How many hours ahead Playout should cache scheduled media files.
 +  # > default is 1
 +  cache_ahead_hours: 1
 +
 +  # Authentication adaptor to use for the legacy service, specify a class like
 +  # LibreTime_Auth_Adaptor_FreeIpa to replace the built-in adaptor.
 +  # > default is local
 +  auth: local
 +
 +storage:
 +  # Path of the storage directory. Make sure to update the Nginx configuration after
 +  # updating the storage path.
 +  # > default is /srv/libretime
 +  path: /srv/libretime
 +
 +database:
 +  # The hostname of the PostgreSQL server.
 +  # > default is localhost
 +  host: postgres
 +  # The port of the PostgreSQL server.
 +  # > default is 5432
 +  port: 5432
 +  # The name of the PostgreSQL database.
 +  # > default is libretime
 +  name: libretime
 +  # The username of the PostgreSQL user.
 +  # > default is libretime
 +  user: libretime
 +  # The password of the PostgreSQL user.
 +  # > default is libretime
 +  password: passwordgénéréautomatiquelorsdelaprocedured'install
 +
 +rabbitmq:
 +  # The hostname of the RabbitMQ server.
 +  # > default is localhost
 +  host: rabbitmq
 +  # The port of the RabbitMQ server.
 +  # > default is 5672
 +  port: 5672
 +  # The virtual host of RabbitMQ server.
 +  # > default is /libretime
 +  vhost: /libretime
 +  # The username of the RabbitMQ user.
 +  # > default is libretime
 +  user: libretime
 +  # The password of the RabbitMQ user.
 +  # > default is libretime
 +  password: passwordgénéréautomatiquelorsdelaprocedured'install
 +
 +email:
 +  # Sender email address to use when sending emails.
 +  # > default is no-reply@libretime.org
 +  from_address: no-reply@libretime.org
 +
 +  # The hostname of the SMTP server.
 +  # > default is localhost
 +  host: localhost
 +  # The port of the SMTP server.
 +  # > default is 25
 +  port: 25
 +  # Whether to use an insecure connection, an SSL/TLS (implicit) connection (generally
 +  # on port 465) or a STARTTLS (explicit) connection (generally on port 587) when
 +  # talking to the SMTP server.
 +  # > must be one of (ssl/tls, starttls)
 +  encryption:
 +  # The username to use for the SMTP server.
 +  # > default is ""
 +  user: ""
 +  # The password to use for the SMTP server.
 +  # > default is ""
 +  password: ""
 +  # Timeout in seconds for blocking operations like the connection attempt.
 +  timeout:
 +  # The path to a PEM-formatted certificate chain file to use for the connection.
 +  cert_file:
 +  # The path to a PEM-formatted private key file to use for the connection.
 +  key_file:
 +
 +playout:
 +  # Liquidsoap connection host.
 +  # > default is localhost
 +  liquidsoap_host: liquidsoap
 +  # Liquidsoap connection port.
 +  # > default is 1234
 +  liquidsoap_port: 1234
 +
 +  # The format for recordings.
 +  # > must be one of (ogg, mp3)
 +  # > default is ogg
 +  record_file_format: ogg
 +  # The bitrate for recordings.
 +  # > default is 256
 +  record_bitrate: 256
 +  # The samplerate for recordings.
 +  # > default is 44100
 +  record_samplerate: 44100
 +  # The number of channels for recordings.
 +  # > default is 2
 +  record_channels: 2
 +  # The sample size for recordings.
 +  # > default is 16
 +  record_sample_size: 16
 +
 +liquidsoap:
 +  # Liquidsoap server listen address.
 +  # > default is 127.0.0.1
 +  # à mettre en 0.0.0.0 pour que liquidsoap écoute l'extérieur (master et show source)
 +  server_listen_address: 0.0.0.0
 +  # Liquidsoap server listen port.
 +  # > default is 1234
 +  server_listen_port: 1234
 +
 +  # Input harbor listen address.
 +  # > default is ["0.0.0.0"]
 +  # à mettre en 0.0.0.0 pour que liquidsoap écoute l'extérieur (master et show source)
 +  # à mettre en 127.0.0.1 pour quels les 8001 et 8002 ne soient pas visibles de l'extérieur = désactiver les fonctions show et master
 +  harbor_listen_address: ["127.0.0.1"]
 +
 +  # Input harbor tls certificate path.
 +  harbor_ssl_certificate:
 +  # Input harbor tls certificate private key path.
 +  harbor_ssl_private_key:
 +  # Input harbor tls certificate password.
 +  harbor_ssl_password:
 +
 +
 +stream:
 +  # Inputs sources.
 +  inputs:
 +    # Main harbor input.
 +    main:
 +      # Harbor input public url. If not defined, the value will be generated from
 +      # the [general.public_url] hostname, the input port and mount.
 +      public_url: https://********.org
 +      # Mount point for the main harbor input.
 +      # > default is main
 +      mount: main
 +      # Listen port for the main harbor input.
 +      # > default is 8001
 +      port: 8001
 +      # Whether the input harbor is secured with the tls certificate.
 +      # > default is false
 +      secure: false
 +
 +    # Show harbor input.
 +    show:
 +      # Harbor input public url. If not defined, the value will be generated from
 +      # the [general.public_url] hostname, the input port and mount.
 +      public_url: https://*****.*****.org
 +      # Mount point for the show harbor input.
 +      # > default is show
 +      mount: show
 +      # Listen port for the show harbor input.
 +      # > default is 8002
 +      port: 8002
 +      # Whether the input harbor is secured with the tls certificate.
 +      # > default is false
 +      secure: false
 +
 +  # Output streams.
 +  outputs:
 +    # Default icecast output
 +    # This can be reused to define multiple outputs without duplicating data
 +    .default_icecast_output: &default_icecast_output
 +      host: *.*******.org
 +      port: 8000
 +      source_password: *************
 +      admin_password: *********************
 +      name: Radio * !
 +      description: Les radios du reseau 
 +      website: https://r*******.org/
 +      genre: various
 +
 +    # Icecast output streams.
 +    # > max items is 3
 +    icecast:
 +      # The default Icecast output stream
 +      - <<: *default_icecast_output
 +        enabled: true
 +        public_url: https://****.********.org:8002/radio*****.ogg
 +        mount: radio*****.ogg
 +        audio:
 +          format: ogg
 +          bitrate: 256
 +
 +      # You can define extra outputs by reusing the default output using a yaml anchor
 +      - <<: *default_icecast_output
 +        enabled: true
 +        public_url: https://****.********.org:8002/radio*****.mp3
 +        mount: radio*****.mp3
 +        audio:
 +          format: mp3
 +          bitrate: 320
 +
 +      - # Whether the output is enabled.
 +        # > default is false
 +        enabled: false
 +        # Output public url, If not defined, the value will be generated from
 +        # the [general.public_url] hostname, the output port and mount.
 +        public_url:
 +        # Icecast server host.
 +        # > default is localhost
 +        host: localhost
 +        # Icecast server port.
 +        # > default is 8000
 +        port: 8000
 +        # Icecast server mount point.
 +        # > this field is REQUIRED
 +        mount: main
 +        # Icecast source user.
 +        # > default is source
 +        source_user: source
 +        # Icecast source password.
 +        # > this field is REQUIRED
 +        source_password: hackme
 +        # Icecast admin user.
 +        # > default is admin
 +        admin_user: admin
 +        # Icecast admin password. If not defined, statistics will not be collected.
 +        admin_password: hackme
 +
 +        # Icecast output audio.
 +        audio:
 +          # Icecast output audio format.
 +          # > must be one of (aac, mp3, ogg, opus)
 +          # > this field is REQUIRED
 +          format: ogg
 +          # Icecast output audio bitrate.
 +          # > must be one of (32, 48, 64, 96, 128, 160, 192, 224, 256, 320)
 +          # > this field is REQUIRED
 +          bitrate: 256
 +
 +          # format=ogg only field: Embed metadata (track title, artist, and show name)
 +          # in the output stream. Some bugged players will disconnect from the stream
 +          # after every songs when playing ogg streams that have metadata information
 +          # enabled.
 +          # > default is false
 +          enable_metadata: false
 +
 +        # Icecast stream name.
 +        name: LibreTime!
 +        # Icecast stream description.
 +        description: LibreTime Radio!
 +        # Icecast stream website.
 +        website: https://libretime.org
 +        # Icecast stream genre.
 +        genre: various
 +
 +        # Whether the stream should be used for mobile devices.
 +        # > default is false
 +        mobile: false
 +
 +    # Shoutcast output streams.
 +    # > max items is 1
 +    shoutcast:
 +      - # Whether the output is enabled.
 +        # > default is false
 +        enabled: false
 +        # Output public url. If not defined, the value will be generated from
 +        # the [general.public_url] hostname and the output port.
 +        public_url:
 +        # Shoutcast server host.
 +        # > default is localhost
 +        host: localhost
 +        # Shoutcast server port.
 +        # > default is 8000
 +        port: 8000
 +        # Shoutcast source user.
 +        # > default is source
 +        source_user: source
 +        # Shoutcast source password.
 +        # > this field is REQUIRED
 +        source_password: hackme
 +        # Shoutcast admin user.
 +        # > default is admin
 +        admin_user: admin
 +        # Shoutcast admin password. If not defined, statistics will not be collected.
 +        admin_password: hackme
 +
 +        # Shoutcast output audio.
 +        audio:
 +          # Shoutcast output audio format.
 +          # > must be one of (aac, mp3)
 +          # > this field is REQUIRED
 +          format: mp3
 +          # Shoutcast output audio bitrate.
 +          # > must be one of (32, 48, 64, 96, 128, 160, 192, 224, 256, 320)
 +          # > this field is REQUIRED
 +          bitrate: 256
 +
 +        # Shoutcast stream name.
 +        name: LibreTime!
 +        # Shoutcast stream website.
 +        website: https://libretime.org
 +        # Shoutcast stream genre.
 +        genre: various
 +
 +        # Whether the stream should be used for mobile devices.
 +        # > default is false
 +        mobile: false
 +
 +    # System outputs.
 +    # > max items is 1
 +    system:
 +      - # Whether the output is enabled.
 +        # > default is false
 +        enabled: false
 +        # System output kind.
 +        # > must be one of (alsa, ao, oss, portaudio, pulseaudio)
 +        # > default is pulseaudio
 +        kind: pulseaudio
 +
 +        # System output device.
 +        # > only available for kind=(alsa, pulseaudio)
 +        device:
 +
 +</file>
 +
 +===== Proxy Apache vhosts =====
 +<file php radio.org.conf>
 + 
 +## Libretime - docker-container
 +<VirtualHost *:80>
 +
 +       ServerAdmin monmail@riseup.net 
 +       ServerName ****.***********.org
 +
 +       ErrorLog ${APACHE_LOG_DIR}/****.***********.org-error.log
 +       CustomLog ${APACHE_LOG_DIR}/****.***********.org-access.log combined
 +
 + ProxyPreserveHost       On
 + ProxyRequests           Off
 +
 +
 +       <Proxy *>
 +               Order deny,allow
 +               Allow from all
 +       </Proxy>
 +
 +RewriteEngine on
 +RewriteCond %{SERVER_NAME} =****.***********.org
 +RewriteRule ^ https://%{SERVER_NAME}%{REQUEST_URI} [END,QSA,R=permanent]
 +</VirtualHost>
 +
 +<file php radio.org-le-ssl.conf >
 +<IfModule mod_ssl.c>
 +<VirtualHost  *:443>
 +
 +    ServerAdmin **@riseup.net
 +    ServerName ****.***********.org
 +
 +       ErrorLog ${APACHE_LOG_DIR}/****.***********.org-error.log
 +       CustomLog ${APACHE_LOG_DIR}/****.***********.org-access.log combined
 +
 + ProxyPreserveHost On
 + ProxyRequests Off  
 +
 +       <Location />
 +        ProxyPass           http://localhost:8080/
 +        ProxyPassReverse    http://localhost:8080/
 +       </Location>
 +
 +       <Proxy *>
 +               Order deny,allow
 +               Allow from all
 +       </Proxy>
 +
 +        SSLEngine on
 +        SSLProxyEngine On
 +        SSLProxyVerify none
 +        SSLProxyCheckPeerCN off
 +        SSLProxyCheckPeerName off
 +        SSLProxyCheckPeerExpire off
 +
 + SSLCertificateFile /etc/letsencrypt/live/****.***********.org/fullchain.pem
 + SSLCertificateKeyFile /etc/letsencrypt/live/****.***********.org/privkey.pem
 + Include /etc/letsencrypt/options-ssl-apache.conf
 +</VirtualHost>
 +</IfModule>
 +</file>
  
libretime_container_docker.1765408583.txt.gz · Dernière modification : de Benjamin Labomedia